How we clean
The cleaning products our teams use
Sun Green Cleaner cleans with its own products rather than whatever is on the shelf. This page sets out what they are, what they are used on and how they are diluted, so you know exactly what is being used in your home or building.
Why our own
Because what is left behind matters as much as what is removed
Conventional chemical cleaners can leave harsh residues that cause allergic and other adverse reactions. Using our own eco- and human-friendly products means we know what is in the bottle and how it should be diluted for each job.
- Concentrates, diluted on site for the surface and the soil
- Refillable spray bottles: refill, reuse, reduce
- Suited to chemically sensitive people and homes with allergies
- Used with microfiber cloths and a fresh mop pad in every room
Enzyme digestant
BIOCLEAN
BIOCLEAN is our enzyme digestant, used on hard surfaces, floors, bathrooms, carpet spots, drain lines and grease traps.
Directions for use
Hard surfaces and floors: For use on all water-safe surfaces including tile, sealed wood, vinyl, porcelain, concrete, metal and painted surfaces. Dilute 4-6 oz of BIOCLEAN with up to 1 gallon of water, spray the area and let dry. Can be used in power and pressure sprayers.
Bathrooms: Spray directly in toilets and urinals and flush. For wet mopping, dilute 4-6 oz of BIOCLEAN per gallon of water in a bucket and mop the floor.
Carpet spotter: Remove excess waste. Test in an inconspicuous area for colorfastness. Dilute 1:2 with water and clean by saturating the area (use mixed solution within 2-4 hours). For severe spots, use at full strength. Repeat the procedure if necessary for persistent stains.
Drain lines: Pour 4-6 ounces in the drain twice a week. For heavily used lines or problem lines, a second dose may be required.
Grease traps: Add 32 ounces for initial treatment. Thereafter add 9 ounces per week by flushing down the toilet. If septic systems are fouled, double the dose for the first 1-3 months.
Do not use with bleach, detergents, harsh chemicals or disinfectants. Keep from freezing. Harmful if swallowed. Keep out of reach of children.
Floor and surface cleaner
Pine Deodorant
PINE DEODORANT is an alkaline-free cleaner and deodorizer designed for maintaining wet-look gloss floor finishes. The balanced formula emulsifies soils for easy, film-free cleaning. It is used to clean floors, walls, counters and desks, or wherever finger marks, oily film deposits and everyday dirt and grime collect, and leaves surfaces deodorized and lightly scented. It is ultra concentrated, low foaming, needs no rinsing and may be used through an automatic scrubber.
Directions for use
Dilute using the following as a guideline, in warm or cold water. Apply by mopping or through an automatic scrubber.
- Light soil: 1 oz per gallon
- Moderate soil: 2-4 oz per gallon
- Heavy soil or general-purpose cleaning: 6-8 oz per gallon
As a multi-purpose cleaner it is diluted 1:128; as a restroom cleaner, 1:16.
For the heaviest jobs
Heavy Duty Degreaser
HEAVY DUTY DEGREASER is a concentrated, high-alkaline degreaser and cleaner for the toughest grease and grime. It cuts through heavy build-up of grease, grime and sludge, and can be used in spray form, with a mop and bucket, in a pressure washer and in automatic scrubbers. It contains corrosion inhibitors for safe use on ferrous metals. We use it where a job calls for it: commercial kitchens, garage and warehouse floors, machinery, and post-construction cleanup.
Applications and dilution
- Machinery, motors and garage floors (grease, oil, printing inks, dyes, adhesives): 1:2
- Kitchens (carbon on ovens, stove tops and range hoods; grease-stained walls, ceilings and acoustic tiles): 1:2 to full strength; soak overnight if necessary
- Steel files, lockers and painted walls (grime, grease and dirt): 1:10; rinse with water
- Composition and hard floors (grime, grease and dirt; heavily soiled concrete): damp mop 1:50; wet mop 1:15 to 1:50
- Furniture and woodwork (grime, finger prints, greasy residue): 1:100; wipe with a damp cloth, then dry with a clean cloth
Quick answers
Questions about our products
Want to know what would be used in your building? Call 505-913-1607.
How is BIOCLEAN diluted for floors and hard surfaces?
Dilute 4-6 oz of BIOCLEAN with up to 1 gallon of water, spray the area and let dry. It is for use on all water-safe surfaces including tile, sealed wood, vinyl, porcelain, concrete, metal and painted surfaces.
Can an enzyme cleaner be used on carpet stains?
Yes. For BIOCLEAN, remove excess waste, test an inconspicuous area for colorfastness, then dilute 1:2 with water and saturate the area. Use the mixed solution within 2-4 hours. For severe spots, use at full strength and repeat if needed.
How do you treat drain lines with an enzyme digestant?
Pour 4-6 ounces of BIOCLEAN in the drain twice a week. Heavily used or problem lines may need a second dose. Do not use it with bleach, detergents, harsh chemicals or disinfectants.
What surfaces are your products safe on?
BIOCLEAN is for all water-safe surfaces: tile, sealed wood, vinyl, porcelain, concrete, metal and painted surfaces. For carpet, always test an inconspicuous area for colorfastness first.
Want these used in your home or building?
Tell us about the space. After we have seen it, a clear, line-itemized estimate follows within 48 hours.